{"id":8129,"date":"2026-09-07T13:35:00","date_gmt":"2026-09-07T10:35:00","guid":{"rendered":"https:\/\/mutlucantuz.com.tr\/chlor-alkali-tanning-textile-salt\/"},"modified":"2026-09-24T00:19:19","modified_gmt":"2026-09-23T21:19:19","slug":"chlor-alkali-tanning-textile-salt","status":"publish","type":"post","link":"https:\/\/mutlucantuz.com.tr\/en\/chlor-alkali-tanning-textile-salt\/","title":{"rendered":"Chlor-Alkali Salt, Tanning Salt and Textile Salt: Choosing Grades"},"content":{"rendered":"<p>Chlor-alkali salt, tanning salt and textile salt are all sodium chloride, yet each sector needs a different grade.<\/p>\n\n<p>A chlor-alkali plant fights calcium and magnesium. A tannery needs clean salt of an even grain.<\/p>\n\n<p>A dye house watches iron and water hardness in every bath.<\/p>\n\n<p>This guide compares the three side by side, from a producer&#8217;s view of raw, washed and double-washed salt.<\/p>\n\n<!-- G\u00d6RSEL: chlor-alkali-salt-washed-solar-salt-lake-tuz.webp | Chlor-alkali salt feedstock: washed solar salt at Lake Tuz (Tuz G\u00f6l\u00fc) -->\n\n<p>Chlor-alkali salt is sodium chloride used to make the saturated brine that is split by electrolysis into chlorine, sodium hydroxide and hydrogen. Plants buy rock salt, washed solar salt or vacuum salt, then purify the brine. Calcium, magnesium and sulphate are the critical impurities, because they foul membranes and reduce cell efficiency.<\/p>\n\n<h2>Why salt specifications differ by industry<\/h2>\n\n<p>Salt in industry is rarely judged on NaCl content alone. What counts is how the rest behaves in the process.<\/p>\n\n<p>In electrolysis, dissolved calcium and magnesium matter most. In hide curing, cleanliness and grain size come first.<\/p>\n\n<p>In dyeing, trace iron and hardness enter the bath. The same lot can suit one plant and fail in another.<\/p>\n\n<p>The salt industries serving these sectors therefore sell by grade: raw, washed, double-washed or refined.<\/p>\n\n<p>Our <a href=\"\/en\/industrial-salt-buyers-guide\/\">industrial salt buyer&#8217;s guide<\/a> explains those grades and the documents to request.<\/p>\n\n<p>For more end uses of industry salt, see <a href=\"\/en\/7-industrial-uses-of-salt-you-didnt-know\/\">7 industrial uses of salt you didn&#8217;t know<\/a>.<\/p>\n\n<h2>Chlor-alkali salt<\/h2>\n\n<h3>Role of salt in brine electrolysis<\/h3>\n\n<p>Chlor-alkali plants dissolve salt into saturated brine and split it with electric current.<\/p>\n\n<p>The products are chlorine, sodium hydroxide (caustic soda) and hydrogen.<\/p>\n\n<p>Saturated brine reaches 310\u2013315 g\/l NaCl, according to the <a href=\"https:\/\/publications.jrc.ec.europa.eu\/repository\/bitstream\/JRC91156\/cak_bref_102014.pdf\" target=\"_blank\" rel=\"noopener\">EU reference document<\/a> (JRC, 2014).<\/p>\n\n<p>Three cell techniques exist: mercury, diaphragm and membrane. Membrane cells need the purest brine.<\/p>\n\n<p>Because the salt is dissolved, its impurities pass straight into the brine circuit.<\/p>\n\n<p>That makes chlor-alkali salt a purity purchase first and a price purchase second.<\/p>\n\n<h3>Critical impurities: calcium, magnesium, sulphate<\/h3>\n\n<p>Calcium and magnesium precipitate near or inside the membrane. They cut current efficiency and raise cell voltage.<\/p>\n\n<p>Plants first precipitate them with sodium carbonate and sodium hydroxide. This is primary brine purification.<\/p>\n\n<p>The JRC document gives ideal primary-purified brine values below 2 mg\/l calcium and below 1 mg\/l magnesium.<\/p>\n\n<p>For membrane cells, ion-exchange resins then bring calcium plus magnesium below 20 \u00b5g\/l, about 20 ppb.<\/p>\n\n<p>Sulphate is the third critical impurity. It lowers current efficiency and is purged or precipitated from the brine.<\/p>\n\n<p>Typical membrane brine specifications allow about 4\u20138 g\/l sulphate, expressed as sodium sulphate.<\/p>\n\n<p>Iron, strontium, barium, aluminium and silica also appear in plant specifications, mostly at low ppm levels.<\/p>\n\n<p>The JRC notes that metals are usually controlled through maximum values in the salt purchase specification.<\/p>\n\n<h3>Solar salt, rock salt or vacuum salt as feedstock<\/h3>\n\n<p>The JRC document lists three main solid feedstocks: rock salt, solar salt and vacuum salt.<\/p>\n\n<p>Its typical figures are 93\u201399% NaCl for rock salt, 99% for washed solar salt and 99.95% for vacuum salt, dry basis.<\/p>\n\n<p>Solar salt is usually purer than rock salt after washing, but it is more prone to caking, the JRC notes.<\/p>\n\n<p>Rock salt tends to carry more calcium sulphate. Vacuum salt can let a plant reduce or skip primary purification.<\/p>\n\n<p>The choice is a trade-off: a cheaper salt means more treatment chemicals and more sludge to handle.<\/p>\n\n<p>In 2011, EU membrane plants mostly used vacuum salt; solar salt was used by only a few plants (JRC, 2014).<\/p>\n\n<p>Our <a href=\"\/en\/raw-lake-salt\/\">raw lake salt<\/a> and washed grades come from solar evaporation ponds at Lake Tuz.<\/p>\n\n<p>Vacuum-refined salt comes from our group brands at K\u0131r\u015fehir Mucur.<\/p>\n\n<p>Our guide to <a href=\"\/en\/pdv-salt\/\">PDV salt<\/a> explains how vacuum salt is made.<\/p>\n\n<h2>Tanning salt<\/h2>\n\n<h3>Hide curing and pickling<\/h3>\n\n<p>Tanning salt has two jobs: preserving raw hides after slaughter and preparing pelts for tanning.<\/p>\n\n<p>Salt is a biostat: it slows bacterial activity by lowering the moisture content of raw hides.<\/p>\n\n<p>The <a href=\"https:\/\/bureau-industrial-transformation.jrc.ec.europa.eu\/sites\/default\/files\/2019-11\/TAN_Published_def.pdf\" target=\"_blank\" rel=\"noopener\">EU reference document on tanning<\/a> (JRC, 2013) puts salting at about 15% of salted hide weight.<\/p>\n\n<p>Salting, brining, drying and salt drying can preserve hides for up to six months.<\/p>\n\n<p>Pickling follows in the tannery. Pelts are treated with acid and common salt before chrome and other tannages.<\/p>\n\n<p>Salt in the pickle float limits acid swelling of the pelt.<\/p>\n\n<p>Typical levels run from 6% for bovine hides to 14% for pickled pelt skins (JRC, 2013).<\/p>\n\n<h3>Grain size and purity<\/h3>\n\n<p>Hide-curing salt should spread evenly over the flesh side and dissolve into the hide&#8217;s own moisture.<\/p>\n\n<p>Tanneries therefore agree a crushed grain size with the supplier, without dust or oversized lumps.<\/p>\n\n<p>Cleanliness matters as much as grain. Salt-tolerant bacteria can survive in salt, and some curers add biocides.<\/p>\n\n<p>The JRC notes that salt can be reused for curing or pickling only if it is sufficiently sterilised and clean.<\/p>\n\n<p>In pickling, the salt dissolves fully into the float. Low insoluble matter keeps the float clean.<\/p>\n\n<p>Raw salt can serve for hide curing. Washed salt suits pickling floats where insolubles are unwanted.<\/p>\n\n<!-- G\u00d6RSEL: crushed-industrial-salt-grains-close-up.webp | Close-up of crushed industrial salt grains for tanning and curing -->\n\n<h2>Textile salt<\/h2>\n\n<h3>Reactive dyeing<\/h3>\n\n<p>Textile salt acts as an electrolyte when dyeing cellulose fibres such as cotton.<\/p>\n\n<p>Reactive dyes are about one third of dyes used on cellulose fibres (EU textiles reference document, JRC 2023).<\/p>\n\n<p>Salt improves exhaustion: it drives more dye from the bath onto the fibre before alkali fixes it.<\/p>\n\n<p>The dose depends on dye affinity and shade depth.<\/p>\n\n<p>The <a href=\"https:\/\/bureau-industrial-transformation.jrc.ec.europa.eu\/sites\/default\/files\/2023-01\/TXT_BREF_2023_for_publishing%20ISSN%201831-9424_final_1_revised.pdf\" target=\"_blank\" rel=\"noopener\">JRC textiles document<\/a> cites 10\u201330 g\/l NaCl for pale shades with high-affinity dyes.<\/p>\n\n<p>Deep shades with low-affinity dyes can need up to 80\u2013100 g\/l.<\/p>\n\n<p>Direct dyes also use salt, or sodium sulphate, as the electrolyte.<\/p>\n\n<p>At these doses, a large dye house buys salt in bulk, so price and consistency both matter.<\/p>\n\n<h3>Why low iron and hardness matter<\/h3>\n\n<p>Calcium, magnesium and especially iron can harm wet processes, including dyeing, the JRC textiles document states.<\/p>\n\n<p>Mills soften their process water and add sequestering agents for this reason.<\/p>\n\n<p>Salt dosed at tens of grams per litre can bring those ions back into a softened bath.<\/p>\n\n<p>That is why textile buyers specify low iron, low hardness and low insoluble matter for textile salt.<\/p>\n\n<h2>Raw vs washed vs double-washed salt: comparison<\/h2>\n\n<p>Washing mainly removes insoluble matter and surface impurities. It does not turn salt into vacuum salt.<\/p>\n\n<figure class=\"wp-block-table\"><table>\n<thead><tr>\n<th><\/th>\n<th>Raw salt<\/th>\n<th>Washed salt<\/th>\n<th>Double-washed salt<\/th>\n<\/tr><\/thead><tbody>\n<tr><td>Processing<\/td><td>Harvested or mined; at most crushed and screened<\/td><td>Crushed, then washed<\/td><td>Crushed, then washed in two stages<\/td><\/tr>\n<tr><td>Insoluble matter<\/td><td>Natural level; varies by source<\/td><td>Reduced<\/td><td>Lowest of the washed grades<\/td><\/tr>\n<tr><td>Surface impurities (calcium, magnesium, sulphate)<\/td><td>Natural level<\/td><td>Reduced<\/td><td>Reduced further<\/td><\/tr>\n<tr><td>Chlor-alkali<\/td><td>Plants with full primary brine treatment<\/td><td>Used as feedstock (washed solar salt)<\/td><td>Where a lower treatment load is wanted<\/td><\/tr>\n<tr><td>Tanning<\/td><td>Hide curing<\/td><td>Curing and pickling<\/td><td>Pickling where a clean float matters<\/td><\/tr>\n<tr><td>Textile dyeing<\/td><td>Check against dye house limits<\/td><td>Check iron and hardness limits<\/td><td>For low-iron, low-insoluble needs<\/td><\/tr>\n<tr><td>Values for your order<\/td><td>Certificate of analysis<\/td><td>Certificate of analysis<\/td><td>Certificate of analysis<\/td><\/tr>\n<\/tbody><\/table><\/figure>\n\n<p>Product details are on our <a href=\"\/en\/washed-salt\/\">washed salt<\/a> and <a href=\"\/en\/double-washed-salt\/\">double-washed salt<\/a> pages.<\/p>\n\n<h2>Consistency across bulk shipments<\/h2>\n\n<p>For salt industries that buy by the shipload, lot-to-lot consistency matters as much as headline purity.<\/p>\n\n<p>A chlor-alkali plant tunes its brine treatment to the salt. A sudden jump in calcium or sulphate costs chemicals.<\/p>\n\n<p>Ask for certificates of analysis from several past lots, not a single sample.<\/p>\n\n<p>Agree the parameters, limits, units and test methods in the contract, and the point where samples are taken.<\/p>\n\n<p>ISO methods cover the key parameters, for example <a href=\"https:\/\/www.iso.org\/standard\/7402.html\" target=\"_blank\" rel=\"noopener\">ISO 2482<\/a> for calcium and magnesium.<\/p>\n\n<p>A producer that controls its own pond or mine can trace each lot back to its source.<\/p>\n\n<p>At Lake Tuz, our salt crystallises in dedicated evaporation ponds. It is harvested, stockpiled and washed.<\/p>\n\n<p>Our laboratory runs continuous quality checks along the process.<\/p>\n\n<!-- G\u00d6RSEL: salt-stockpile-lake-tuz-harvest.webp | Harvested salt stockpile at Lake Tuz before washing -->\n\n<h2>FAQ<\/h2>\n\n<div id=\"rank-math-faq\" class=\"rank-math-block\">\n<div class=\"rank-math-list \">\n<div id=\"faq-question-d176a875cf164\" class=\"rank-math-list-item\">\n<h3 class=\"rank-math-question \">What salt is used in chlor-alkali production?<\/h3>\n<div class=\"rank-math-answer \">\n\n<p>Chlor-alkali plants use rock salt, washed solar salt, vacuum salt or solution-mined brine. The choice depends on the cell technique and on the plant&#8217;s brine purification. Membrane cells need brine with calcium plus magnesium below about 20 ppb after ion exchange, so the salt&#8217;s calcium, magnesium and sulphate levels drive treatment cost.<\/p>\n\n<\/div>\n<\/div>\n<div id=\"faq-question-4dbf1672b5564\" class=\"rank-math-list-item\">\n<h3 class=\"rank-math-question \">Can raw salt be used for curing hides?<\/h3>\n<div class=\"rank-math-answer \">\n\n<p>Yes, provided it is clean, dry and of a grain size that spreads evenly over the hide. The EU tanning reference document cites typical salting of about 15% of salted hide weight. For pickling, where the salt dissolves into the float, washed grades with lower insoluble matter are often preferred.<\/p>\n\n<\/div>\n<\/div>\n<div id=\"faq-question-f0030f1480144\" class=\"rank-math-list-item\">\n<h3 class=\"rank-math-question \">Why do textile dyers need high-purity salt?<\/h3>\n<div class=\"rank-math-answer \">\n\n<p>Reactive dye baths can hold tens of grams of salt per litre, so the salt&#8217;s impurities become part of the bath. Calcium, magnesium and especially iron can harm wet processes, including dyeing, which is why mills soften their water and add sequestering agents. Low-iron, low-hardness salt with little insoluble matter supports consistent results.<\/p>\n\n<\/div>\n<\/div>\n<div id=\"faq-question-bac5936603624\" class=\"rank-math-list-item\">\n<h3 class=\"rank-math-question \">How is salt quality checked on delivery?<\/h3>\n<div class=\"rank-math-answer \">\n\n<p>Take representative samples from several points of the load, at the point agreed in the contract. Test the agreed parameters by the agreed methods, such as the ISO methods for industrial sodium chloride, and compare the results with the certificate of analysis and specification. Keep retained samples until the lot has been used.<\/p>\n\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n\n<h2>Discuss your grade with our technical team<\/h2>\n\n<p>Tell us whether you run electrolysis, tanning or dyeing, and share the limits in your current specification.<\/p>\n\n<p>We will suggest a grade from our <a href=\"\/en\/industrial-salt\/\">industrial salt<\/a> range.<\/p>\n\n<p>Ask us for a recent certificate of analysis before you place a trial order.<\/p>","protected":false},"excerpt":{"rendered":"<p>How chlor-alkali salt, tanning salt and textile salt differ: purity, calcium and magnesium limits, grain size, and when raw or washed salt is the right grade.<\/p>\n","protected":false},"author":1,"featured_media":8341,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[74],"tags":[],"class_list":["post-8129","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-blog"],"_links":{"self":[{"href":"https:\/\/mutlucantuz.com.tr\/en\/wp-json\/wp\/v2\/posts\/8129","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/mutlucantuz.com.tr\/en\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/mutlucantuz.com.tr\/en\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/mutlucantuz.com.tr\/en\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/mutlucantuz.com.tr\/en\/wp-json\/wp\/v2\/comments?post=8129"}],"version-history":[{"count":1,"href":"https:\/\/mutlucantuz.com.tr\/en\/wp-json\/wp\/v2\/posts\/8129\/revisions"}],"predecessor-version":[{"id":8163,"href":"https:\/\/mutlucantuz.com.tr\/en\/wp-json\/wp\/v2\/posts\/8129\/revisions\/8163"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/mutlucantuz.com.tr\/en\/wp-json\/wp\/v2\/media\/8341"}],"wp:attachment":[{"href":"https:\/\/mutlucantuz.com.tr\/en\/wp-json\/wp\/v2\/media?parent=8129"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/mutlucantuz.com.tr\/en\/wp-json\/wp\/v2\/categories?post=8129"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/mutlucantuz.com.tr\/en\/wp-json\/wp\/v2\/tags?post=8129"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}