Blog

Macro view of cubic salt crystals used to assess grain size

EN 16811-1 Explained: De-Icing Salt Requirements and Grades

EN 16811-1 is the European standard for sodium chloride used as de-icing salt on roads.

It sets requirements and test methods, so buyers and suppliers describe the same product in the same terms.

This explainer covers what the standard includes, how road authorities use it and what to ask a supplier.

For the wider picture, from melting to storage, see our de-icing salt guide.

EN 16811-1:2016 is the European standard that sets requirements and test methods for sodium chloride used for winter road maintenance. It covers crystalline salt and brine delivered to the customer, and sets limits for sodium chloride content, sulphate, moisture, grain size, anti-caking agent, pH and heavy metals. Road authorities cite it in tenders to specify de-icing salt.

What is EN 16811-1?

EN 16811-1 is a European Standard issued by CEN, the European Committee for Standardization.

  • Full title: Winter service equipment and products – De-icing agents – Part 1: Sodium chloride – Requirements and test methods
  • Edition: EN 16811-1:2016, published in the UK as BS EN 16811-1:2016 on 31 August 2016
  • National versions: adopted by national bodies, for example as DIN EN 16811-1 in Germany and SS-EN 16811-1 in Sweden
  • Related parts: EN 16811-2 covers calcium and magnesium chloride; CEN/TS 16811-3 covers other de-icing agents

It gives European buyers one common de-icing salt standard for the quality and testing of road salt.

As a road salt specification, it describes the product. It does not say how much salt to spread.

Spread rates are set by national and local guidance, not by a European standard (EUSalt, 2021).

Scope: sodium chloride de-icing agents

The standard applies to sodium chloride spread on roads in winter, in two forms delivered to the customer:

  • Crystalline salt: dry, semi-dry or wet salt, spread from hoppers with or without pre-wetting
  • Brine: sodium chloride solution delivered ready for spraying or for pre-wetting

Requirements depend on how the product is used and stored, and whether it is spread or sprayed (BSI, 2016).

It does not cover calcium or magnesium chloride, organic de-icers or abrasives such as grit and sand.

Origin is not restricted. Rock salt, solar salt and evaporated salt are all used as de-icing salt (EUSalt, 2021).

Our rock salt vs solar lake salt comparison explains how the sources differ.

Grain size classes defined in the standard

EN 16811-1 sorts crystalline salt into four grain size classes: extra fine, fine, medium and coarse.

Each class is defined by sieve analysis: the share of salt, by weight, that passes a set of test sieves.

The EUSalt report on winter maintenance with salt summarises the limits as follows:

Class Sieve limits, % passing by weight
Extra fine0.125 mm: max. 5 · 0.8 mm: 25–100 · 2.0 mm: 100
Fine0.125 mm: max. 5 · 0.8 mm: 10–40 · 1.6 mm: 30–80 · 3.15 mm: 90–100 · 5.0 mm: 100
Medium0.125 mm: max. 7 · 0.8 mm: 5–35 · 1.6 mm: 10–60 · 3.15 mm: 45–90 · 6.3 mm: 100
Coarse0.8 mm: max. 35 · 3.15 mm: 30–80 · 6.3 mm: 75–95 · 10 mm: 100

Source: EUSalt, Environmental Impact of Winter Maintenance with Salt, Table 1 (2021).

Finer classes dissolve faster. Coarser classes dissolve more slowly and drift less in wind on dry roads.

Spreaders are calibrated for a given grade, so a change of class usually means recalibration.

Chemical and physical requirements: NaCl content, insolubles, moisture

EUSalt’s summary lists these main requirements:

Requirement Limit in EN 16811-1
Sodium chloride (NaCl)min. 90 %
Sulphatemax. 3 %
Moisture, dry saltmax. 0.6 %
Moisture, semi-dry saltmax. 2.0 %
Moisture, wet saltmax. 6.0 %
pH5–10
Heavy metals and hydrocarbonsIndividual limits, e.g. lead ≤ 5 mg/kg, cadmium ≤ 2 mg/kg, mercury ≤ 0.5 mg/kg
Delivery conditionFree-flowing and usable at the delivery point

Source: EUSalt, Table 1 (2021).

The NaCl minimum protects de-icing performance. More sodium chloride per tonne means more melting power.

The sulphate limit reflects the risk sulphate poses to concrete structures (EUSalt, 2021).

The three moisture classes let buyers state how dry the salt must be when it arrives.

Insoluble matter is not listed as a separate limit in the EUSalt summary. The NaCl minimum caps it indirectly.

Buyers who need low residue, for example for brine making or footways, can set their own insolubles limit.

Anti-caking agents and labelling

Anti-caking agents keep salt free-flowing in storage. In de-icing salt the usual agent is a ferrocyanide.

EN 16811-1 allows ferrocyanide up to a maximum of 125 mg/kg, according to EUSalt (2021).

EUSalt also reports that ferrocyanide does not persist in the environment.

For clear labelling, ask the supplier to show these details on the product description and delivery documents:

  • Reference to EN 16811-1 and, where relevant, the national annex
  • Grain size class and moisture class
  • Anti-caking agent type and dose
  • NaCl content and origin: rock salt, solar salt or evaporated salt
  • Batch or lot number that links to the certificate of analysis

Check the exact marking wording against the official text before you write it into a contract.

How road authorities use EN 16811-1 in tenders

European standards are voluntary unless a law or a contract calls them up (CEN-CENELEC).

Road authorities make EN 16811-1 binding by naming it in their tender documents. A typical specification:

  1. Names EN 16811-1:2016 as the reference standard, plus any national annex.
  2. Selects a grain size class and a moisture class.
  3. Sets stricter values where needed, such as a higher NaCl minimum or a lower sulphate limit.
  4. States anti-caking agent limits and the required delivery condition.
  5. Asks for a product description and a recent certificate of analysis for the grade offered.
  6. Defines sampling and testing on delivery, and what happens if a lot fails.

Some countries set stricter national values. EUSalt (2021) lists these examples:

National version NaCl, minimum Sulphate, maximum
Austria, ÖNORM EN 16811-197.5 %1.0 %
France, NF EN 16811-198 % (class A), 91 % (class B)not stated
Germany, DIN EN 16811-197 %1.5 %
Switzerland, SN EN 16811-197 %1.5 %

In the UK, BSI still lists BS 3247:2011+A1:2016 for highway salt as current, so check which one a tender cites.

For timing, formats and shipping, see our guide to bulk road salt procurement.

Supplier checklist

Before shortlisting a supplier of salt for deicing, check these points:

  • A current certificate of analysis for the exact grade offered, not a generic product sheet
  • Declared grain size class and moisture class under EN 16811-1
  • NaCl, sulphate and insolubles values, with the test methods named
  • Anti-caking agent type and dose
  • Source of the salt and the production site
  • Management system certificates, such as ISO 9001 and ISO 14001
  • Packaging options: bulk, big bags or sacks
  • Sampling arrangements and traceability from batch to delivery

Management certificates show how a producer works. On their own, they do not prove EN 16811-1 conformity.

Mutlucan Tuz holds ISO 9001, ISO 14001, ISO 45001:2018, ISO 22000 and TS 13001; see our certificates.

For grade-specific data, ask us for the current analysis certificate of our road salt.

Good salt deicing starts with a precise specification. The standard gives you the words to write one.

FAQ

Is EN 16811-1 mandatory?

Not by itself. CEN states that the use of standards is voluntary, although laws, regulations and contracts can make them compulsory. In practice, EN 16811-1 becomes binding when a road authority writes it into a tender or supply contract.

Which grain size is used for roads?

There is no single road grade. Authorities pick the EN 16811-1 class that suits their spreaders, spreading method and climate, then calibrate the spreaders for it. Finer classes dissolve faster; coarser classes dissolve more slowly and drift less in wind on dry roads.

Can rock salt and solar salt both meet EN 16811-1?

Yes. The standard sets limits for the product, not for its origin, and EUSalt lists rock salt, solar salt and evaporated salt as suitable de-icing salts. Whether a specific product meets a given class depends on its test results, so ask for a certificate of analysis for that grade.

How does EN 16811-1 relate to national specifications?

Each CEN member country must adopt a European Standard as a national standard, such as BS EN or DIN EN 16811-1. Some countries add national annexes with stricter values, for example a higher minimum NaCl content. In the UK, BS 3247 is also still listed as current, so tenders should state which specification applies.

Request an analysis certificate

Tell us the grain size class and moisture class you need, and we will send test data for the matching grade.

Reach our export team through the contact page.